Himfloor FC130

HIM

Water based epoxy resin floor coating

Uses

Himfloor FC130 has been designed for use as a dustproof easily cleaned surface which is resistant to most oils and chemicals. Typical areas of use include warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and light vehicular traffic.

Advantages

  • Hygienic-provides a seamless floor surface which is easily cleaned
  • Chemical resistant-good resistance to a wide range of chemicals
  • Non-slip and easy to clean
  • Durable-good resistance to abrasion
  • Attractive-available in a range of RAL colours
  • Water based-safe in use, low odour

Technical data

Mixing ratio base : hardener
Parts by weight 19:81
Parts by volume 21:79

Specific gravity
(mixed)

approx. 1.25
approx.40%
Material consumption
(theoretical)
0.51/m 2 per coat
depending upon substrate and preparation
Potlife at 20°C 45 minutes
Curing time at 20°C touch dry after 3-4 hours, light foot traffic after approx. 24 hours, recoatable after 1 day, within 7 days. Fully cured after 7 days.
Chemical resistance The cured coating is resistant to petrol, mineral oils and fats, detergents, some aliphatic hydrocarbons and diluted alkalis.
For further information on chemical resistance please contact HIM Netherlands.

Temperature limitations

Himfloor FC 130 shall not be applied at temperatures below 5°C, nor a substrate temperature which is lower than the dewpoint temperature plus 3°C. The maximum application temperature its 35°C. The maximum relative humidity is 80%.

Surface preparation

It is essential the thoroughly prepare the floor surface in order to achieve a sound, clean and dry substrate. Because Himfloor FC130 is a relatively thin coating, the substrate must be fine textured. Any surface irregularities may show through causing excessive wear on high spots and changing the perceived colour of the coating.

Concrete substrates: a sound, clean substrate is essential to achieve maximum adhesion.
Epoxy screeds: Himfloor FC130 may be applied to Himfloor epoxy resin screeds.
Asphalt floors: Himfloor FC130 can be applied to asphalt floors provided they are at least 6 month old.Himfloor FC130 can be used to overcoat Cemtop to provide a more easily cleaned, chemically resistant surface. Apply 2 coats of Himfloor FC130, generally 24 hours after the installation of Cemtop.

Limitations

New concrete floors should be at least 28 days old and give a hygrometer reading not exceeding 5% (protimeter).

Primer

No primer is necessary.

Mixing

Proper mixing of the base component should be poured into the hardener container. Mix the components for a least 3 minutes. The use a heavy duty slow speed drill fitted with a mixing paddle is desirable.

Material consumption(theoretical)

0.15/m² per coat depending upon substrate and preparation.

Product description

Himfloor FC130 is a tow-component water dispersed epoxy resin coating. The cured film forms a pigmented, matt seal to concrete and other substrates. The product is available in a wide range of standard RAL colours.

Colours

Himfloor FC130 can be supplied in 24 standard RAL colours. Please consult colour card.

Flooring system

2-3 coats of Himfloor FC130

Maintenance

The service life of a floor can be considerably extended by good housekeeping. Regular cleaning may be carried out using a rotary scrubbing machine with a water miscible cleaning agent at temperatures up to 50°C.

Application

The mixed Himfloor FC 130 should be applied to the prepared surface using a brush or lambswool roller. Ensure that areas is completely coated and that “ponding” of the material does not occur since water may be trapped within the product, thus preventing complete cure. The second coat may be applied as soon as the first coat has initially dried (typically 16 hours). The time will be dependent on the type of surface and the ambient conditions. God drying conditions are requited to allow complete evaporation of the water as the resin cures. Adequate ventilation and air movement is necessary.

Potlife at 20°C

45 minutes

Curing time at 20°C and rel.hum.65%

Touch dry after 3-4 hours, light foot traffic after approx. 24 hours, recoatable after 1 day, within 7days. Fully cured after 7 days.

Tool cleaning

Himfloor FC130 can be removed from tools and equipment with water.

Shelf life

Himfloor FC130 has a shelf life of 12 months if kept in a dry, cool store in the original, unopened packs.

Safety precautions

Avoid contact with skin and eyes. Use only in well ventilated areas. In case of insufficient ventilation, wear suitable respiratory equipment. Do not breath vapour. Wear suitable protective clothing, gloves and eye/face protection. If swallowed, seek medical advice immediately and show the container or label-do not induce vomiting. After contact with skin, wash immediately with plenty of water and soap. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep away from sources of ignition-do not smoke. For further information, refer to the Material Safety Data sheet.

Flash point

Himfloor FC 130 base > 100°C
Himfloor FC 130 hardener > 100°C

Disposal

Disposal of spillage or empty packaging should be in according with local waste disposal regulations. For further information refer to the Material Safety Data sheet.
HIM Industrial and
decorative flooring
protective
coatings
for steel and concrete
   
 
  HIM Netherlands
Wijkermeerweg 12
PO box 1
1950 AA Velsen-Noord
téléphone +31(0)251-276 300
télécopie +31 251 225 031
HIM France
50 avenue des Frères Lumière
ZA Trappes-Elancourt BP135
78996 trappes cedex
telephone +33 (0)1 30069 3782
fax +33(0)1 3069 3793
Him Belgium
Leenstraat 42
9070 Heusden (O-VL)
telephone +32(0)99 232 1111
télécopie +32(0) 9 230 6906

DNV

company
certified
ISO 9001

Important notice

notice the above data are based on tests believed to be reliable and are given for information only. The data are correct on the issuing date sheet. Since conditions of use are beyond our control, we cannot and do not assume any liability in connection with the use of product relative to coverage performance. Injury or any other achievement. Published data are subject to be modified without prior notice. We therefore advice you to inquire approx. 12 months after issuing date of this data sheet if all data are still valid and up-to-date.
All our deliveries are subject to the uniform sales and delivery conditions for paints and printing ink filed with the registry of the Amsterdam district court. Purchase conditions as supplied by the buyer will not be accepted by us( articles 1 of uniform sales and delivery conditions)